Create an Account - Increase your productivity, customize your experience, and engage in information you care about.
Show All Answers
A significant tree is a tree with a diameter-at-breast-height of six (6) inches or more.
The diameter-at-breast-height (DBH) of a tree’s trunk is measured 4.5 feet above the ground. To find the diameter of a tree, first measure the circumference as shown in the first image below. Then divide the circumference by 3.14. The result will equal the diameter of the tree. Refer to the second image below for reference of these terms.
In cases where trees have multiple trunks, use the image below for guidance on how to measure these trees.
The requirements for tree removal on single-family residential properties differs depending on whether other construction activity is occurring at the time the tree removal is proposed. Below is a summary of the code requirements for each situation - please see the Woodinville Municipal Code for a full list of regulations.
Any proposal requiring a tree permit, except as provided for lots without construction below, shall meet minimum tree density credits required for the zone the property is located in:
Tree credits afforded to each tree is determined by measuring the diameter-at-breast-height (DBH) of each tree. Trees credits values are determined by the table below:
The density credit for a single-family property is the sum of all retained existing trees on site, plus any new or supplemental trees that are planted. If a site falls below the minimum tree density with existing trees, supplemental planting shall be required. See WMC 21.50.060 for more information.
If no construction activity is proposed on a single-family residence at the time the tree removal permit is reviewed, then the following requirements apply:
The removal of more than four trees with a single permit may be permitted for the purposes of tree thinning or the removal of dead, nuisance, or hazard trees, with the following requirements:
Proposed subdivision or short subdivisions will be required to demonstrate the following (see WMC 21.50.080 for additional requirements):
Multi-family (R-12 – R-48 zones) and non-residential properties do not have minimum tree density credit requirements. Instead, these properties are required to provide perimeter, parking lot, and interior landscaping as required in Chapter 21.43 WMC.
Trimming or removal of trees located within critical areas or buffers is prohibited, except if the trees proposed for trimming or removal are determined to be hazardous, nuisance, or dead by a certified arborist, and this claim is confirmed by the City. In this instance, the removal shall comply with the following:
Logs in streams provide habitat for fish. The State Department of Fish and Wildlife, which manages state fisheries and has jurisdiction over all activities that physically affect streams, strictly prohibits removal of logs from streams. An exception to this policy is if a log creates an imminent hazard during a flood. The City cannot grant such permission, nor assist private property owners in removal (unless it threatens a bridge or other public property).